Sinotruk Howo Sewage Suction Vehicle

Chassis configuration: SINOTRUK HOWO chassis, MC07.34-60 engine, 340 horsepower.
Tank volume: About 22 cubic meters, 6 cubic meters of clean water, and about 15 cubic meters of sewage. The tank head thickness is 8mm.
High-pressure section: It is equipped with Pinfu 330 flow high-pressure pump, and the high-pressure pipe from the pump outlet to the winch is 32mm in diameter.
Configuration of clean water tank: One additional hand-washing valve on each side of the front of the clean water tank, an additional flow meter, and one fire hydrant interface on each side of the front of the clean water tank (the hose of the fire hydrant interface on the co-pilot side is directly connected to the top of the tank). A cement tank mouth on the clean water tank, and a 50-round valve on the top as an exhaust valve. The sewage tank uses a cement tank mouth.
Configuration of sewage tank: The clean water tank and sewage tank on the co-pilot side are connected with a 4-inch ball valve. A ladder is built in each of the clean water tank and sewage tank. The sight glass on the co-pilot side is consistent with the announcement. The oil cylinder is top-mounted, with limit valves and safety supports. The rear head can be rotated with a hydraulic winch. The high-pressure pipe is 60 meters long, 25mm in diameter, and can withstand 22mpa. There is a 600mm inner diameter hydraulic opening sewage outlet at the bottom of the rear head, a 6-inch sewage valve (stainless steel) on the lower left of the rear cover, a 6-inch illegal discharge valve (stainless steel) and a 4-inch sewage valve. A 4-inch suction valve on the upper right of the rear cover goes directly to the top of the tank (with a baffle to prevent tank top corrosion), and a 4-inch exhaust valve on the lower right of the rear cover. A 4-inch ball valve on the co-pilot side of the suction pipe. A 1.2-meter stainless steel bottom plate is added to the bottom of the sewage tank.
Other configurations: The water circulation pump water tank is as large as possible (stainless steel material), and a large ordinary toolbox. The inlet and outlet pipes of the high-pressure pump are 89mm in diameter. A small arrow light is installed at the rear. The clean water tank is rust-proof, and the paint is yellow on top and red at the bottom. A 10-meter suction pipe is delivered, and a Yuchai 160 horsepower is equipped with an imported Roots pump, and a floor washing rod.